Test Instrumentation & Control ¦ point2point DC Coupled Analog Links

point2point AC Link Specifications

PPM’s point2point AC Analogue Fibre Optic Link performance specifications are summarised below, for more detail refer to the specification sheet downloads below.

	PAx-Gx-6x	PAx-Kx-6X	PAx-Px-6x	PAx-Sx-6X
Bandwidth (-3dB)	<40Hz to >250MHz	<2kHz to >1.35GHz	<1MHz to >2GHz	<10MHz to >3GHz
Jitter (measured on a 100MHz sinewave)	<10ps rms	<10ps rms	<10ps rms	<10ps rms
Simultaneous Dynamic Range @ 100MHz	>150dB in a 1Hz bandwidth	>150dB in a 1Hz bandwidth	>150dB in a 1Hz bandwidth	>150dB in a 1Hz bandwidth
Gain Stability	Better than ± 0.25dB after 20 minutes warm up	Better than ± 0.25dB after 20 minutes warm up	Better than ± 0.25dB after 20 minutes warm up	Better than ± 0.25dB after 20 minutes warm up
Passband Flatness	40Hz - 100kHz: ± 1.5dB 100kHz - 250MHz: ±0.75dB	2kHz - 100kHz: ± 1.5dB 100kHz - 1.35GHz: ±1dB (typ 0.5dB)	± 1dB	± 1dB
Phase Flatness	>100Hz: ± 20°	>5kHz: ± 20°	± 20° (typ ± 5° for 1MHz to 1.5GHz)	± 20° (typ ± 5° for 1MHz to 1.5GHz)
Input P1dB	>0dBm @ 100MHz	>0dBm @ 500MHz	>0dBm @ 500MHz	>0dBm @ 500MHz
Input IP3	>10dBm @ 100MHz	>10dBm @ 500MHz	>10dBm @ 100MHz	>10dBm @ 500MHz

Frequently Asked Questions about point2point products

Technical Specification - point2point AC Coupled Links

Test Results

Shown on the right is the frequency response for the 10MHz to 3GHz links. The vertical sale is 10dB/div.

Click here for larger image.

AC_Performance_250

On the left is the phase response for the 10MHz to 3GHz links. The vertical scale is 10 degrees/div.

Click here for larger image.

If you are looking for information on Fibre Optic Links for SatCom, Broadcast, antenna remoting, military, security, GPS timing, cellular or radio applications then please visit www.vialite.co.uk for more information. sales@ppm.co.uk +44 1793 784389